Colony Construction is an experienced oil and gas construction company in Canada, delivering structural steel, pre-engineered buildings, modules, and process support structures for oil sands, LNG, conventional oil and gas, and midstream clients. From the Alberta oil sands to BC’s LNG corridor, our steel shops up fast, meets hazardous-location requirements, and performs in Canada’s harshest environments.
Oil and Gas Construction Expertise
Since 1985, Colony Construction has delivered steel to oil sands operators, LNG proponents, midstream companies, and gas plant builders across Western Canada. Our project portfolio includes work at Imperial Oil’s Kearl Lake operation, MEG Energy Phase 2, Syncrude’s Mildred Lake mine, and LNG Canada’s Cedar Valley Lodge accommodations facility in Kitimat.
We build MCC buildings, pipe rack modules, process support structures, warehouses, shops, truck fills, and camp facilities for oil and gas clients. Our team is familiar with the engineering rigour required on Canadian oil and gas projects – multiple layers of review, tight QA/QC documentation, rigorous HSE expectations, and schedule discipline driven by first-oil, first-gas, and first-LNG milestones.
Colony routinely fabricates to CSA S16, CSA W59, CSA B51 (where applicable), ABSA requirements in Alberta, and client-specific engineering standards. Our detailing team works in SDS/2 and Tekla, producing fully coordinated models that integrate with client piping, instrumentation, and civil deliverables. We understand that oil and gas clients usually work in a multi-contractor environment with an EPCM in the middle, and our project management is set up to function inside that model – with clear interface management, document control, and change management.
Our Services for Oil and Gas
- Pre-Engineered Steel Buildings – Warehouses, shops, MCC buildings, and camp infrastructure delivered to remote oil sands and LNG sites on compressed schedules.
- Conventional Steel Construction – Heavy structural steel for process support, pipe racks, and equipment framing engineered to client piping and equipment loads.
- Cladding and Roofing Systems – Insulated panels, liner systems, and purpose-built enclosures for cold-weather oil and gas facilities.
- Structural Components – Pipe rack modules, equipment supports, access platforms, stair towers, and bridge crane runways for process and utility areas.
- Design-Build – Single-source delivery for MCC buildings, maintenance shops, and camp facilities where schedule and certainty of delivery matter.
Challenges We Solve for Oil and Gas Clients
Regulatory Compliance
Oil and gas facilities operate under AER, OGC, CER, TSBC, and ABSA oversight, among others. Colony’s engineering and QC teams document material traceability, weld procedure qualifications, and as-built records to support client regulatory submissions.
Remote Sites
Oil sands, LNG, and Montney sites are often hundreds of kilometres from major centres. We plan fabrication, packaging, and shipping around client logistics windows, coordinating with module yards and site construction managers to sequence steel into the right sub-area.
Hazardous Environments
Many oil and gas structures sit adjacent to classified electrical zones, H2S-bearing equipment, or flammable process streams. Our structures are detailed with appropriate grounding, bonding provisions, and hazardous-area access platforms, and our site crews work to client-specific HSE systems.
Weather Extremes
From -45 C winters in Fort McMurray to wind-driven coastal conditions in Kitimat, our steel is specified with appropriate notch toughness, cold-weather welding procedures, and cladding systems engineered for the governing wind and snow loads at each site.
Schedule Pressure
First-oil, first-gas, and first-LNG milestones cost operators millions of dollars per day of slip. Colony’s in-house engineering, detailing, and multi-shop fabrication footprint allow us to compress schedule significantly, and our design-build service further overlaps design with fabrication and erection.
Oil and Gas Projects
Imperial Oil Kearl Lake
Colony delivered structural steel for Imperial Oil’s Kearl Lake oil sands operation north of Fort McMurray. The work required Arctic-grade material specifications and close coordination with the module yards and site contractors delivering the overall project.
MEG Energy Phase 2
On MEG Energy’s Phase 2 expansion, Colony supplied structural steel into a complex, fast-paced SAGD program. Our work supported multiple sub-areas with concurrent deliveries and coordinated erection sequencing.
Syncrude Mildred Lake Mine
At Syncrude’s Mildred Lake operation, Colony supplied steel into one of Canada’s longest-running oil sands mining and upgrading facilities. The scope reflected the discipline and documentation expectations of brownfield oil sands work.
LNG Cedar Valley Lodge
Colony contributed to LNG Canada’s Cedar Valley Lodge workforce accommodations near Kitimat, BC, serving the thousands of construction workers building Canada’s first large-scale LNG export facility.
Where We Build for Oil and Gas
Colony’s oil and gas project footprint is concentrated in Western Canada, where we ship steel to the Alberta oil sands, northeast BC Montney and LNG corridors, and Saskatchewan conventional oil and gas operations.
Frequently Asked Questions – Oil and Gas Construction
What oil and gas structures does Colony build?
Colony fabricates and erects MCC buildings, warehouses, maintenance shops, pipe rack modules, equipment supports, access platforms, truck fills, and camp facilities. We work across oil sands mining and SAGD, LNG, gas plants, and midstream infrastructure.
Does Colony hold ABSA authorizations for pressure-related work?
Our structural steel work routinely interfaces with ABSA-regulated equipment. Where pressure-retaining fabrication is required, we coordinate with appropriately certified partners and ensure our structural scope is fully coordinated with the pressure envelope design.
Can Colony meet oil sands cold-weather material requirements?
Yes. Our steel for oil sands and northern oil and gas projects is specified with appropriate Charpy V-notch toughness, cold-weather welding procedures, and mill test certificate traceability to meet client and regulatory expectations.
Does Colony fabricate modules for module-yard assembly?
Yes. We fabricate pipe rack sections, equipment skids, and structural modules for module yards across Western Canada, coordinating with yard assembly schedules and transport logistics including over-dimensional shipments.
How does Colony support client HSE expectations on site?
Our field crews work to client-specific HSE management systems, complete site-specific orientation and pre-task hazard assessments, and participate in integrated contractor safety forums. Our own HSE program is aligned with COR and ISN-recognized practices.
Can Colony support LNG projects in BC?
Yes. We have delivered on LNG-related scope in BC, including Cedar Valley Lodge, and we are positioned to support ongoing LNG development on the BC coast with structural steel, modules, and building systems.
Start Your Oil and Gas Construction Project
Send us your scope, schedule, and site details. A Colony estimator will review your project and reply within one business day.